Welcome
Login / Register

How To Carry A Heavy-Duty Jack In Your Rig

Thanks! Share it with your friends!

URL

You disliked this video. Thanks for the feedback!

Sorry, only registred users can create playlists.
URL


Added by Admin in How to remove mud
2 Views
Loading...
загрузка...

Description

If you run bigger wheels or tires on your rig there's a chance you'll have to change them while you're out on the trail. And usually, the stock jack that comes with a vehicle isn't going to cut it. So here is a way to carry a bigger, more heavy-duty jack and also a way to keep it from sinking down in the mud or sand.

Get started by putting down some measurements on a piece of 16-gauge sheet metal. For our project, it's about 23 X 12". Next, mark a 1" bend line. You can then weld it to your cage, in our case it's going on the PreRunner.

Next up is making sure it won't sink in the mud or sand. Simply weld on a piece of aluminum to the bottom to disperse the weight. Using an angle grinder and grinding disk, take the powder coating off the jack. Then TIG weld the plate to the bottom. You can also weld a couple pieces of tubing to keep the handles in place and washers to keep it all in place.

Websites:

https://www.PowerNationTV.com
https://www.PowerBlockTV.com

Facebook Pages:

PowerNation - https://www.facebook.com/PowerNationTV
PowerBlock - https://www.facebook.com/PowerBlockTV
PowerNation Daily - https://www.facebook.com/PowerNationDaily
Detroit Muscle - https://www.facebook.com/DetroitMuscleTV
Engine Power - https://www.facebook.com/EnginePowerTV
Truck Tech - https://www.facebook.com/TruckTechTV
Xtreme Off Road - https://www.facebook.com/XtremeOffRoadTV

Twitter:

PowerNation - https://www.twitter.com/PowerNationTV
PowerBlock - https://www.twitter.com/PowerBlockTV

Instagram:

PowerNation - @PowerNationTV
PowerBlock - @PowerBlockTV

For more on PowerNation, check out PN+ at http://bit.ly/2oTCIyJ

Post your comment

Comments

Be the first to comment
загрузка...
Loading...
RSS